Ei3105RF Aico RadioLink Wireless Optical 9V Smoke Alarm

Ei3105RF Aico RadioLink Wireless Optical 9V Smoke Alarm

• RF wireless interconnect
• Unique house coding feature
• Visual RF transmission indicator
• High performance optical chamber with integral insect screen
• Test button
• Advanced suppression and calibration technology
• Radio transmitter and receiver in each alarm
• Built in auto self test feature
• Low power cell warning
• Kitemarked to BS EN 14604:2005
• 5 year guarantee

Product Description:

The Ei3105RF is an Optical Smoke Alarm that runs on 9V alkaline battery and is part of the Radio Frequency range of smoke alarms. The RF signal will wirelessly interconnect the Ei3105RF to other RadioLINK products. The Ei3105RF uses advanced radio transceiver technology with unique software coding to transmit and receive the radio signals. The transmissions are frequency modulated (FM) and use Manchester coding to ensure robust signal integrity and avoid signal noise interference.

The Ei3105RF has other advanced features such as high performance optical chambers fitted with integral insect screens to reduce the chances of false alarms, as well as the ability to wireless interconnect up to twelve alarms to allow all alarms to sound if just one of the interconnected alarms should be triggered. The Ei3105RF has built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.

Applications:

The new Ei 3100 series of RF Smoke Alarms using 9Volt Alkaline batteries is designed to meet entry level installation requirements and provide wireless interconnected fire detection in domestic applications.The unique and trusted Ei Smoke Alarm technology is now combined with current Rf developments to provide better fire detection.

Main Features:

• Radio transmitter and receiver in each alarm
• RF range 150 metres(minimun) in free space
• Uniquely coded to work with one system only
• Advanced suppression and calibration technology increases reliability
• Large volume, high performance optical chamber
• Fitted with insect resistant screen to reduce nuisance alarms
• Hush button for false alarm control
• Auto self-test feature continually monitors the sensor every 40 seconds for additional safety
• 9V Alkaline Battery
• Wireless interconnect with up to 12 other Ei Electronics RF smoke alarms
• 5 year guarantee

Technical Specification:

• Sensor: Optical, uses light scatter from smoke
• Sensitivity: Complies with BS 5446 Part 1: 2000
• Automatic Self-Test: Smoke Chamber is tested every 40 Sec. and unit beeps (without LED flash) if it is degraded.
• Supply Voltage: 9V alkaline battery
• RF Range: 150 meters (min) free space
• RF Visual Indicator: Amber light flashes continuously for 1.5 to 3.5 seconds while transmitting RF signal
• RF Frequency: 868.499MHZ (1% duty cycle)
• RF Power: +5dBM
• Dimensions: 140mm x 120mm x 45mm
• Weight: 220g
• Power-On Indicator: Red light flashes every 40 seconds
• Alarm: Electronic Piezoelectric horn
• Alarm Sound Output: 85dB (minimum) at 3m
• Alarm Status: Red LED flashes every second on unit sensing fire
• Temperature Range: 0º to 40º C
• Humidity Range: 15% to 95% Relative Humidity
• Interconnect: Up to 12 RadioLINK products
• Plastic material: UL94HB flame retardant
• Warranty: 5 year (limited) warranty
• Approvals: Kitemarked to BS

Not suitable for use with either Ei410 or Ei411H