Kentec Syncro Multi Input/Output Unit (MIOU)

Kentec Syncro Multi Input/Output Unit (MIOU)

Occupying less than 20% of the space required by conventional I/O units, the MIOU replaces the large and expensive enclosures normally required for this application.

With 8 opto-isolated inputs and 8 volt-free relay contacts (relay output individually selectable as normally open, normally closed or switched voltage outputs), the MIOU will find a multitude of uses in concentrated I/O applications.

Features:

• Multiple inputs and outputs at one address
• Opto isolated inputs
• Volt free contact or switched voltage outputs
• Considerable space and cost saving over discreet I/O units
• Easy clip-on din rail mounting method
• Compatible with Solo, Syncro AS and Syncro control equipment
• Low standby supply current
• Hochiki ESP protocol

Technical Specifications:

• Dimensions: K559: 203L x 77W x 45D, H66000M2/H66750M2: 385L x 310H 90D
• Boxed unit battery capacity: 2.6Ah 12V (2 per unit)
• Finish - lid & box: Epoxy powder coated
• Colour - lid & box: BS 00 A 05 grey - fine texture
• Boxed unit IP rating: IP30
• Module mounting: Symmetrical or asymmetrical din rail
• Communication protocol: Hochiki ESP
• Supply voltage H66000M2: 24V DC
• Supply voltage H66750M2: 110 or 230V AC 50 or 60Hz (specify when ordering, default is 230V)
• Quiescent supply current: 10 milliamps
• Input operated current: 3 milliamps
• Output operated current: 18 milliamps
• Input trigger resistance: 1k maximum
• Output contact rating: 30V DC 1 Amp maximum
• Switched -ve output: 65 milliamps maximum per output
• Minimum recommended PSU: 750 milliamps at 24V DC
• Operating temperature: -5 to +40°C
• Device sub-address count: 17 (of 800 permitted in Syncro/Syncro AS panel)
• Address setting: Hochiki hand held programmer (TB1010)