Rafiki Twinflex PLUS 2 Zone Kit
The Twinflex starter kit simplifies the equipment selection and offers a good starting point for a small installation.
Everything needed to begin an installation in one boxed kit.
Kit Contents
- 6 Twinflex Multipoints with integral sounder
- 2 Surface or Flush Call Points
- 1 Head Removal Tool
- 2 zone plus panel
Battery Requirements 72hr: 2 x 2.3Ah 12v (not included)
About Twinflex Plus
Based on the 2-wire Twinflex system, the revolutionary Twinflex plus incorporates "Checkpoint" technology to eliminate the problem of nuisance alarms.
How It Works
At the planning stage, fire zones are designated as either "Dwelling" or "Communal". Multipoint detectors in the dwelling zones have the facility to use "checkpoint" technology - see Feature Article: "Checkpoint Technology Filters Nuisance Alarms on Conventional System"
"Checkpoint" technology is the ability to select a checking period for individual detectors to confirm the smoke/heat detected as a genuine fire not an unwanted alarm.
This checking period can be selected between 1 - 8 minutes at commissioning stage after consultation with fire officers or other authorised bodies.
- Two wire installation plus all the features of the standard Twinflex system.
- Programmable (1-5 minute) automatic detector alarm confirmation in dwelling zones.
- Local sounder operates while detector alarm is confirmed.
- Full alarm when detector alarm confirmed.
- Immediate full alarm when fire detected in communal areas.
- Multipoint detector offers 7 modes of detection .
- Built-in sounder with 92dBA output.
- All devices have built-in EOL monitoring.
- Callpoint identification.
- EN54 compliant.
- Eliminates disruption of nuisance alarms.
- Perfect solution for BS5839 pt 6 (HMO's).
- No need for mixed systems.
|
