Ei167 Mains Powered Remote Siren complete with RadioLink Base
Ei167 Remote Siren
MAINS POWERED 230V~Lithium Battery Back-Up
- Remote Siren only - no smoke detection
- Tamper proof rechargeable lithium battery back up Test button
- Interconnectable to other Ei mains powered alarms
- Low power cell warning
- 5 year guarantee
Ei168 Radio Frequency Base
MAINS POWERED 230V RF Communication ~Lithium Battery Back-Up
It is from here that the radio signals are transmitted and received.
- RF wireless interconnect
- Unique house coding feature
- Visual RF transmission indicator
- Advanced suppression and calibration technology
- Radio transmitter and receiver in each base
- Easi-fit design construction
- Tamper proof rechargeable lithium battery back up
- Low power cell warning
- RF performance to EN300220-3
- EMC performance to EMC 301489-3
- 5 year guarantee
Product Description
The Ei167 is a remote siren that runs on 230V AC mains power, and has built in tamper proof rechargeable lithium cells that act as a battery back up in the event of mains failure. These rechargeable lithium cells are designed to have a ten year life and outlast the life of the unit itself, whilst providing up to six months of operation without mains power.
The Ei167 has built in circuitry to aid suppression of voltage transients and RF interference to further reduce the chances of false alarms under such conditions.
The Ei168 RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF signal from another Ei168 Base, the attached alarm will sound. It therefore eliminates the need to install long interconnect wires between all the alarms on different floors in different rooms.
Ei168 itself is also mains powered and has rechargeable lithium cells for back-up in the event of mains failure.
The Ei168 base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The alarm is then slid onto the base rather than to its mounting plate. As many as twelve units can be interconnected in this way
The RF range can be extensively improved by either adjusting the wire antenna or by converting the base into a "repeater" i.e. re-transmission of the RF signals.
The Ei168 has built in circuitry to aid suppression of voltage transients and RF interference.
|
