Smoke Alarm | Intruder Alarm | Fire Extinguishers | Fire Alarms | Fire Alarm Systems | Carbon Monoxide Detectors | Smoke Detector
Basket ContentsMy Account   Deliveries �3.95 + VAT
  Home » Catalogue » Smoke Alarms and Smoke Detectors » Detector Bases » Ei168 My Account  |  Basket Contents  |  Checkout   
Manufacturers
Information
Deliveries £3.95 + VAT Postage
Privacy Notice
Conditions of Use
Contact Us

Ei168 Mains Powered RF Base
[Ei168]

£42.95 Ex VAT

Price: £42.95 Ex VAT
Ei168 Price Match Promise
Manufacturer: Aico
Model No: Ei168
Qty:
Ei168 Mains Powered RF Base Datasheet download
Ei168 Mains Powered RF Base Instructions download

Ei168 Radio Frequency Base

MAINS POWERED 230V~RF Communication

Designed for use with the Easi Fit range of alarms and its fully compatible with any Ei160 or Ei140 series alarms. - It is from here that the radio signals are transmitted and received. 

  • RF wireless interconnect
  • Unique house coding feature
  • Visual RF transmission indicator
  • Advanced suppression and calibration technology
  • Radio transmitter and receiver in each base
  • Easi-fit design construction
  • Tamper proof rechargeable lithium battery back up
  • Low power cell warning
  • RF performance to EN300220-3
  • EMC performance to EMC 301489-3
  • 5 year guarantee
Product Description

The Ei168 RadioLINK Base transmits a radio frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF signal from another Ei168 Base, the attached alarm will sound. It therefore eliminates the need to install long interconnect wires between all the alarms on different floors in different rooms.

The Ei168 RadioLINK Base is designed for use with the Easi Fit range of mains powered alarms. The Ei168 itself is also mains powered and has rechargeable lithium cells for back-up in the event of mains failure.

The Ei168 base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The alarm is then slid onto the base rather than to its mounting plate. As many as twelve units can be interconnected in this way

The RF range can be extensively improved by either adjusting the wire antenna or by converting the base into a "repeater" i.e. re-transmission of the RF signals.

The Ei168 has built in circuitry to aid suppression of voltage transients and RF interference.

Operation
  • In normal standby mode the amber indicator will light to indicate transmission of an RF signal
  • In code mode, the amber indicator will flash to indicate the number of other RF alarms that have been "learned" in the system
  • The red indicator on the alarm attached to the Ei168 Base will flash rapidly to show an alarm condition for the smoke detector
  • The amber light will flash every 10 seconds to indicate that the battery back up is depleted
Applications

The Ei168 RadioLINK Base transmits a Radio Frequency (RF) alarm signal when the unit attached to it senses fire. When it receives an RF alarm signal from another Ei168 Base, the attached smoke or heat alarm will sound. It therefore eliminates the need to run long interconnect wires between all the smoke alarms on different floors and in different rooms.

It is designed for use with the EasiFit range of Mains Powered Smoke/Heat Alarms. The RadioLINK Base itself, is also mains powered and has rechargeable Lithium cells for back-up in the event of mains failure. The RadioLINK Base will normally be wired to the nearest mains circuit in the ceiling (usually the lighting circuit). The Smoke/Heat Alarm is then slid on to the RadioLINK Base rather than to its normal mounting plate. As many as 12 units can be interconnected in this way.

Main Features

  • Mains Powered
  • Designed for use with the EasiFit range
  • RF range 150 metres(minimun) in free space
  • Innovative Incremental RF Signal Range through 'Repeater' software
  • Uniquely coded to work with one system only
  • Advanced suppression and calibration technology increases reliability
  • Low power cell warning in the event of a cell failure
  • 10 year Rechargeable Lithium Cell Back-up
  • Wireless interconnect with up to 12 other units
  • 5 year guarantee

 

Technical Specification

  • Sensor None
  • Supply Voltage: 230V
  • AC Battery back up: Rechargeable lithium cells
  • RF Range: 150 meters (min) free space
  • Range Improvement: Adjustable antenna
  • RF Visual Indicator: Amber light flashes continuously for 1.5 to 3.5 seconds while transmitting RF signal
  • RF Frequency: 868.499MHZ (1% duty cycle)
  • RF Power: +5dBM
  • Dimensions: 150mm diameter x 19mm depth
  • Weight: 168g
  • Power-On Indicator: Green light on the attached mains powered alarm can be seen
  • Alarm characteristics: Available in the attached alarm
  • Temperature Range: 0° to 400° C
  • Humidity Range: 15% to 95%
  • Relative Humidity
  • Interconnect: Up to 12 RadioLINK products
  • Warranty: 5 year (limited) warranty
  • Plastic material: UL94VO flame retardant
  • Warranty: 5 year (limited) warranty
  • Approvals: RF performance to EN300220-3 EMC performance to EMC 301489-3

Reviews
Related Products
Related Product
Ei411H RF Remote Control
£46.50 Ex VAT
Related Product
Ei407 RF Manual Call Point
£32.95 Ex VAT
Related Product
Mains RadioLink Heat Alarm with Lithium Backup
£77.00 Ex VAT
Related Product
Mains RadioLink Remote Siren
£66.00 Ex VAT
Related Product
Ei410 Hand Held RF Remote Controller
£34.66 Ex VAT
Shopping Basket
0 items
All prices displayed:
Ex.VAT


McAfee Secure sites help keep you safe from identity theft, credit card fraud, spyware, spam, 
viruses and online scams
Manufacturer Info
Aico
Other products
Featured Products
Dorgard (Black)
£88.00 Ex VAT
£84.00 Ex VAT
2 Zone Twinflex PLUS Fire Alarm Kit
£274.50 Ex VAT
Rotary Fire Alarm Bell
£24.50 Ex VAT
86RACEN Ionisation Smoke Alarm with Alkaline Battery
£13.35 Ex VAT
What's New?
Exit for emergency use only
£3.24 Ex VAT
Final Fire Exit 200x100 R/P
£1.65 Ex VAT

If you find the same product cheaper elsewhere we'll match the price or refund the difference within seven days of purchase. For details read our Price Match Promise.