The Sita 200 plus is an Addressable Fire Alarm system that can have up to 200 detectors and sounders on one loop. Making this system an unrivalled choice in fire protection
This Addressable Fire Alarm has been designed to high specification and quality standards and is intended to fully comply with the new EN54 -2 and EN54 - 4 standards and EU directives.
System Performance
With the Sita 200 plus Addressable Fire System a high technology approach has been adopted, with a microcomputer in each device Implementing a large degree of distributed intelligence.
The system can support 200 Multipoint combined detector/sounders on a singe loop. Each one does not only provides detection, but also a built in sounder with 92dB Alarm.
Integrity of the system is maintained by way of a built-in isolator in each device. Sita system intelligence has been harnessed in such a way that equipment used is very easy to install, commission and maintain.
Benefits of Using an Addressable Fire System
The Rafiki Addressable Fire Panel has one main advantage over Conventional System. It greatly saves time in locating a Detecor that has been set off and potentially locating a Fire far more quickly. This is a big advantage for medium to large premises where finding a detector can take a long time. Locating a detector can be very disruptive for a business or tenants especially when there is no actual fire. This addressable fire system could save you time, money and essentially lives
System Features
Loop length up to 3.2 kms. long (2 miles long) with spurs
Fast short circuit isolator in every device
Very low current consumption
Digital communication with high power transfer
Can be pre-configured on a pc or via control panel on site
Choice of up to 15 combinations of smoke or heat detection programmable at control panel or via connected PC
Optional built-in sounder in each Multipoint provides 7 sound patterns and 3 volume settings
Supported by a range of loop-powered sounders
Auxiliary digital inputs and outputs are available at any addressable Multipoint device
Repeater units available - connected on a bi-directional serial link
Multi stage alarms - pre-alarm feature
Simple commissioning procedure to zone and personalise devices
Automatic continuous self calibration of addressable Multipoint detectors
Multipoint detectors are monitored for all failure modes of sensor chamber - warnings indicated when smoke detector heads require service
