Why Choose Fike?

Fike offers a range of conventional and addressable fire systems. Their unique combined smoke, heat and sounder detectors allow for easy installation and provide maximum protection against fires.

The Fike Twinflex is their range of conventional panels and this is available in 2, 4 and 8 zones. The Fike Twinflex is a two wire system which allows for 32 devices per zone and each unit has its own built in end of line unit. The Fike Twinflex now has checkpoint technology built in as standard to help prevent the nuisance caused by false alarms. The Fike Twinflex complies fully to BS and EN standards.

The Checkpoint technology allows for time delays in certain zones before going into full fire so if cooking fumes were to trigger the detector, the occupant would have time to clear the smoke and prevent an evacuation , see our Checkpoint Technology Article for more details.

This is the typical wiring for the Rafiki Twinflex

The Fike Sita and DuoNet are their range of addressable panels which allows you to identify exactly which unit has been activated.

The Fike Sita Addressable System is single loop panel which can have up to 200 devices on a 3.2km loop (on spurs). The Fike Sita offers multi alarm stage feature (much like checkpoint technology) to prevent false alarms. The system is fully programmable via the Fike Software and the Sita system intelligence has been harnessed in such a way that the equipment used is very easy to install.

The control panel has been designed to high specification and quality standards and fully complies with the new EN54 -2 and EN54 - 4 standards and EU directives. Sita is approved to the above standards by LPCB (Loss Prevention Certification Board).

This is the typical wiring for the Rafiki Sita

The Fike DuoNet is a 2 loop addressable panel which offers a full network capacity of 250 panels with each loop being able to accommodate 200 devices allowing 400 devices on One DuoNet Panel. The DuoNet panel allows the user and engineer more features on the interface of the panel. Once devices are registered to the panel they fully customisable from the panel rather than the need for a PC.

Fike offer a wide range of devices for their panels which include their renowned and unrivalled combined heat, smoke and sounder detectors available for both conventional and addressable systems. The combined technology within detectors cuts out time needed for installation and the overall amount of devices needed in the system. Fike offer call points, sounders and flashpoint as well as other fire safety products.

Fike products offers the engineers an easy to install and reliable system to work with and offers the end user a good price and an attractive modern easy to use system that suits most scenarios. To View Fike's wide range see our Fike Section

Fike Fire Alarms

Why Choose Fike?

Recent Posts

News Categories